Balancing machine selection steps:

1. According to the rotor (workpiece) is required to double-side calibration or single-side calibration to primary choose of the balance machine.

When the length and diameter ratio of the rotor is > 0.2, choose double-sided balancing machine .On the contrary, choose single - sided balance machine.

3. Comparing the residual unbalance of the rotor (Uper) with the minimum achievable ucbalance (Umar).

A) when Uper > Umar, the balance machine is selected correctly. The rotor Uper value can be calculated according to the previous calculation formula, and the balance machine cannot be selected correctly without the Uper value .

B)When the minimum Umar> Uper，indicating that the existing universal balance machine cannot meet the rotor balance requirements, it needs to be redesigned or changed into a special balancing machine.